+86-18632864688
 Home  > Products > FRP Storage Tank And Tower Equipment > Site Wound Tank
  • Site Wound Tank
  • Site Wound Tank

Site Wound Tank

Our Company.is a special fabricator that manufactures FRP vessels,chemical tower equipment with rich practical experience.The maxi diameter of the FRP vessel is 50000mm and the volume is 100000m.The characteristics as below:
Follow us:

Our Company.is a special fabricator that manufactures FRP vessels,chemical tower equipment with rich practical

experience.The maxi diameter of the FRP vessel is 50000mm and the volume is 100000m.The characteristics as below:

(1) Light weight: the density of FRP is 1.5-1.9g/cm3 1/4 of steel's,but higher strength.

(2) Corrosion resistant: select different resins as per the variety of the media,such as acid,alkaline,salt,oil and solvent.

FRP can be used in every chemical corrosion resistance area; it can replace the stainless steel,nonferrous metal etc,and

decline the cost.

(3) Smooth inner surface: easy to clean,the roughness coefficient is n=0.0084,has good sanitary property,can resist the

corrosion of animalcule.If choose the food grade resin,the FRP products can meet the requirement of sanitation without toxicity and without taste.

(4) Good property against the low temperature: FRP can be used in minus 80C .suitable for the cold area.

(5) The thermal expansion factor is 2x 10-5/℃,the thermal conductivity is 0.2kcal(m2-h."C ),has good thermal insulation

property.

(6) Easy to shape,convenience to maintenance: especially easy to make the complicated equipment,the large-scale vessel can be winding at job-site.

(7) Can match the accessories,such as level indicator,FRP handrail,ladder,platform etc.as per the requirement of user.

The advantages of FRP have been applied in the products from our Company,and the application field is widely,such as

chlorine-alkaline poly silicon environmental protection deodorization,foodstuff and brewery,seawater desalination,

pasteurization dioxide titanium,chemical fiber,metallurgy waste gas treatment,etc.

Site Wound Tank

Site Wound Tank
height(mm)\
diameter(mm)\
volume(m³)
5500 6000 7000 8500 10000 12000 15000 20000 25000 30000 40000
200 8450 7100
300 12660 10640 7830
400 14180 10420 7080
500 13020 8840
600 10600
700 12370 8940
800 14130 10220
900 11490
1000 12760
1200 15130 10640
1400 12410
1600 14180 9080
1800 15950 10220
2000 11350
2200 12480 7030
2400 13640 7670
2500 14180 8000 5100
5000 10200 7080
10000 14150 8000
The other specifications can be designed per the requirement

HOT PRODUCTS

PRODUCTS
CONTACT US
  • Plant address:No. 1056 South Yingbin Street, Jizhou district, Hengshui City, Hebei 053200 China 
  • Office address:No.1217 Wangjiao International, Qiaoxi District, Shijiazhuang City, Hebei 050000 China
  • Tel: +86-18632864688
  • Mobile: +86-18632864688
  • Whatsapp: +86-18632864688
  • E-mail: sales01@aldfrp.com
  • Fax: +86 10-80115555-566233
MESSAGE
Copyright Hengshui Jiubo Composites Co.,LTD. All rights reserved.   
Online Service×