+86-13363884492 +86-13303314492
 Home  > News

Do you understand the curing of FRP Pipe?

FRP Pipe mainly uses glass fiber and other products as the main reinforcement material, which can achieve stable working effect during use. FRP Pipe also has polymer unsaturated polyester resin, epoxy resin and other materials. , will achieve a stable working effect during the use process.

There are other materials in the pipe, which will achieve more stable work during use, and the length of the FRP Pipe is also very wide, one is six meters long, the other is 12 meters long, different lengths The FRP Pipe will also achieve different working effects when used. It is necessary to combine these actual conditions to continuously improve the FRP Pipe, which will bring more effects to the pipe itself.

FRP Pipe

When using FRP Pipe, there are some curing conditions. The main reason is that the volatile content of the tape is not particularly large. The temperature of the coil is very low when used, and there is a very fast speed. In this case, it will have a more stable working effect, so that there will be no residue in the tube, which will have more benefits for heating the tube.

It has a very stable working effect when working, and FRP Pipe also has polymer unsaturated polyester resin components, and it is because of these different raw materials that the FRP Pipe is processed in quality. Better, can get more consumers' recognition and affirmation.

Moreover, FRP Pipe will have some problems when it is used. If it is not solved in time, it will have a very serious impact on the FRP Pipe material itself, especially after curing. When the tube is solidified, it must be timely. Find a solution. Once the tube has a solidification reaction, be sure to find the problem in time. When using the FRP Pipe, you should pay attention to the temperature control. Roll it at the proper temperature. You can't let the height There are a lot of sub-machines, which will be greatly affected when processing FRP Pipe. During the operation, the amount of glue in the tape can be appropriately reduced, so that the temperature during winding will be significantly reduced, thus achieving better Application effect.

  • Plant address:No. 1056 South Yingbin Street, Jizhou district, Hengshui City, Hebei 053200 China 
  • Office address:No.1217 Wangjiao International, Qiaoxi District, Shijiazhuang City, Hebei 050000 China
  • Mobile: +86-13363884492 +86-13303314492
  • Whatsapp: +86-13363884492 +86-13303314492
  • E-mail: belen@aldfrp.com bella@aldfrp.com
Copyright Hengshui Jiubo Composites Co.,LTD. All rights reserved.   
Online Service×